What is the procedure for adjusting the polar home position on a telescope?
- With the exception of setting the telescope tube such that the Declination Setting Circle is 90 degrees from the zenith, the remaining steps for the Polar Home Position are similar to the Alt/Az Home Position (pointing up, parallel with the fork arms – pointing to Polaris, if it is visible). In this position, the telescope is in the Polar Home Position.
- 1 What is the home position of a telescope?
- 2 Is Meade telescope out of business?
- 3 What is the home position?
- 4 What is alt az position?
- 5 Why can’t I see out of my Meade telescope?
- 6 How do you focus a Meade Autostar telescope?
- 7 Is Meade a good telescope brand?
- 8 Did Orion buy Meade?
- 9 Is Meade Instruments still in business?
What is the home position of a telescope?
The home position of the mount is the position at which the telescope is aiming at either the NCP (north celestial pole) or the SCP (south celestial pole) (south celestial pole). Set the mount such that its balancing (counter-weight) bar is pointing downwards and the scope is oriented north or south to achieve this result (as appropriate).
Is Meade telescope out of business?
In a recent antitrust action against a rival, Meade and its Chinese parent firm, Ningbo Sunny, were unsuccessful. Meade Instruments, the iconic telescope manufacturer, filed for Chapter 11 bankruptcy protection last month, following a years-long court struggle with a competitor.
What is the home position?
The home position on a CNC machine is the default origin point that is established when the machine is first powered on. On starting, most modern CNCs move to the extremes of each axis, dance around for a few seconds, and then return to what is commonly referred to as the “home” position of the machine.
What is alt az position?
ALT/AZ Home Position for the ETX “Alt/Az” The ETX’s home position is with the optical tube of the telescope level and pointing in the direction of either True North or Magnetic North, depending on the model. Take a look at Figure 1. The successful finding of the alignment stars will be ensured by the proper placement of the telescope in the home position.
Why can’t I see out of my Meade telescope?
If you are unable to see anything clearly through your telescope at night, you should first try using the scope in the daytime. In a reflector, it is the little tube that protrudes from the side of the telescope, almost at the front end of the telescope. Insert your eyepiece into the tube and tighten the setscrew(s) to ensure that it is held firmly in place.
How do you focus a Meade Autostar telescope?
In this mode, Autostar picks a bright star and adjusts the telescope to point in its direction. By moving your cursor over the star in the viewfinder and then the eyepiece, you may center it in the eyepiece. In order to be easily identified, the alignment star should be the brightest object in the sky in the direction in which the telescope is oriented. When the star is in the middle, press the ENTER key.
Is Meade a good telescope brand?
For a very long time, Meade Instruments has been producing the highest-quality and most outstanding telescopes available. Among other Meade Instruments, it is considered to be one of the best refracting telescopes available. You may readily examine celestial and earthly objects with its 102mm aperture because of its large size.
Did Orion buy Meade?
Orion Telescopes & Binoculars has bought Meade, a well-known maker of telescopes and binoculars. “I am thrilled to have the chance to collaborate with Meade workers, customers, and suppliers as the next chapter of Meade’s business journey begins,” says Peter Moreo, President of Orion (and new President of Meade).
Is Meade Instruments still in business?
The corporation was created in 1972 and has its headquarters in Irvine, California. They began off by selling modest refracting telescopes to amateur astronomers. The Newtonian reflector and Schmidt-Cassegrain telescopes were developed as a result of this expansion. As of right present, the Meade website is operational and the company is still in business.